On Debian 13 (Trixie), libvirt packaging is modularized and
the libvirt-daemon-lock package (providing virtlockd) is
optional. The evacuate hook previously assumed all libvirt
services were installed and failed when stopping/starting
missing units.
Extract a reusable manage_libvirt_service.yaml task file that
checks if a service exists via systemctl list-unit-files
before managing its units. This prevents failures when
optional libvirt packages are not installed and future-proofs
against further packaging changes.
Generated-By: claude-code
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Change-Id: Ie84e2e8ab2d3065b1562ee5e256fa163541955f7
Signed-off-by: Sean Mooney <work@seanmooney.info>
This fixes an instance of us passing a disk image to qemu-img for
resize where we don't constrain the format. As has previously been
identified, it is never safe to do that when the image itself is not
trusted. In this case, an instance with a previously-raw disk image
being used by imagebackend.Flat is susceptible to the user writing a
qcow2 (or other) header to their disk causing the unconstrained
qemu-img resize operation to interpret it as a qcow2 file.
Since Flat maintains the intended disk format in the disk.info file,
and since we would have safety-checked images we got from glance,
we should be able to trust the image.format specifier, which comes
from driver_format in imagebackend, which is read from disk.info.
Since only raw or qcow2 files should be resized anyway, we can further
constrain it to those.
Notes:
1. qemu-img refuses to resize some types of VMDK files, but it may
be able to resize others (there are many subformats). Technically,
Flat will allow running an instance directly from a VMDK file,
and so this change _could_ be limiting existing "unintentionally
works" behavior.
2. This assumes that disk.info is correct, present, etc. The code to
handle disk.info will regenerate the file if it's missing or
unreadable by probing the image without a safety check, which
would be unsafe. However, that is a much more sophisticated attack,
requiring either access to the system to delete the file or an
errant operator action in the first place.
Change-Id: I07cbe90b7a7a0a416ef13fbc3a1b7e2272c90951
Closes-Bug: #2137507
Signed-off-by: Dan Smith <dansmith@redhat.com>
Preserve NVRAM variable store during stop/start, hard reboot, live
migration, and volume retype.
This does not affect cold migration or shelve.
For UEFI guests (hw_firmware_type=uefi), every time the instance is
started, the UEFI variable storage for that instance
(/var/lib/libvirt/qemu/nvram/instance-xxxxxxxx_VARS.fd) is deleted
and reinitialized from the default template.
The changes are based on this patch by Jonas Schäfer to preserve the
vTPM state:
https://review.opendev.org/c/openstack/nova/+/955657
Closes-Bug: #1633447
Closes-Bug: #2131730
Change-Id: I444a9285c07a04bf08a73772235f8dd73d75e513
Signed-off-by: Nicolai Ruckel <nicolai.ruckel@cloudandheat.com>
Add support for os-vif TAP device pre-creation when Neutron sets
the 'ovs_create_tap' flag in vif_details. This reduces live
migration downtime by ensuring the network is fully wired before
the VM starts.
Changes:
- Add VIF_DETAILS_OVS_CREATE_TAP constant to model.py
- Propagate create_tap from binding details to os-vif port profile
in os_vif_util.py
- Set managed='no' in libvirt XML when create_tap is enabled so
libvirt uses the pre-created TAP device
- Set multiqueue on port profile in _plug_os_vif based on instance
flavor/image hw:vif_multiqueue_enabled property
When checking oslo.versionedobjects fields for backward compat:
- Use 'field in obj.fields' to check if field exists in schema
- Use 'field in obj' to check if field value is set
Depends-On: https://review.opendev.org/c/openstack/os-vif/+/971231
Generated-By: Cursor claude-opus-4.5
Closes-Bug: #2069718
Change-Id: I32343658b53e317696d1bd8b984793bfeeccd409
Signed-off-by: Sean Mooney <work@seanmooney.info>
This enables live migration for TPM instances with the ``host`` secret
security mode. The ``host`` security mode uses key manager service
secrets owned by the instance owner. The secret is persisted in
Libvirt and is sent over RPC to the destination during a live
migration.
The service version will be bumped in a separate patch.
Related to blueprint vtpm-live-migration
Change-Id: I97e9dd454c793abcb1a20579b1ceaec627be4813
Signed-off-by: melanie witt <melwittt@gmail.com>
This prepares for a service version bump and adds a minimum service
version check in the API to reject live migration requests for vTPM
instances until the entire cloud is upgraded to the new version.
The actual service version bump will be included in a later patch that
implements vTPM live migration.
Related to blueprint vtpm-live-migration
Change-Id: I7daef8037385a4077dc0a78f03ae4b34a57560b7
Signed-off-by: melanie witt <melwittt@gmail.com>
As libvirt driver's Host object has a new headless thread we need to
make sure that thread is exiting cleanly when nova-compute is being
stopped.
Also at the same time we make sure our unit tests are not leaking such
thread across test cases with a new fixture and fixes in the test code.
Change-Id: Ide274d6caa3314f9d25d51d1f72850cf77c9dee4
Signed-off-by: Balazs Gibizer <gibi@redhat.com>
It was a naive implementation it is replaced with
StaticallyDelayingCancellableTaskExecutorWrapper.
Signed-off-by: Balazs Gibizer <gibi@redhat.com>
Change-Id: I5e8d496473d4ec167d1655368a00cbfa78d2c074
During the VM hard reboot there is 3 events coming from libvirt
* STOPPED
* RESUMED
* STARTED
The libvirt driver implements automatic power sync of the VM based on
the STOPPED event. But it should not do a stop() compute api call if the
STOPPED event is followed right after by a STARTED event during hard
reboot. So the libvirt driver delays processing the STOPPED event by 15
seconds and cancels the event if another lifecycle event is received for
the same domain during that delay. In eventlet mode this is implemented
by sheduling a greenlet and cancelling it. With native threading we
cannot cancel a running task / thread so we need a bit smarter solution
than just adding a sleep to the event handler and putting it in a
threadpool.
So this patch introduces an Executor wrapper that allows delaying the
submission of a task into a real Executor by a predefine delay and checks
for cancellation before during the real submission.
The wrapper uses a single thread and a queue of tasks. As the delay is
the same for every tasks the ordering of the execution of the tasks are
the same as the order they was submitted to the wrapper. So the thread
can process the queue of tasks one by one, check for the remaining
time until the deadline of the oldest task then submit it to the real
executor, then take the next task from the queue.
Cancellation of a task is checked before any wait for a deadline and
before the submission to the real executor. So a task is never executed
if cancelled during its delay period.
Change-Id: I8fb3bb1e5506f2792522bf822939e7e8ab68763d
Signed-off-by: Balazs Gibizer <gibi@redhat.com>
QEMU's scsi-block device driver does not support physical_block_size
and logical_block_size properties. When Cinder reports disk geometry
for LUN volumes, Nova was incorrectly including a <blockio> element
in the libvirt XML, causing QEMU to fail with:
Property 'scsi-block.physical_block_size' not found
This fix adds a check to skip blockio generation when source_device
is 'lun', following the existing pattern used for serial at line 1356.
Generated-By: claude-code (Claude Opus 4.5)
Closes-Bug: #2127196
Change-Id: Idf87e936edd97aac719222942c9842a9aca4c270
Signed-off-by: Sean Mooney <work@seanmooney.info>
In commit 76d64b9cb4 we enable
one io-thread per qemu instance. Live migration should update this.
Related-Bug: #2139351
Change-Id: I1476de288490c88a60db697fbb45b4f783821c14
Signed-off-by: hongda.xun <hongda.xun@easystack.cn>
This tests repoduces the current bug where the iothread pinning
is not updated for numa instnace on live migration and
enhance the libvirt fixture to make this possible
we also provide a sanity check for non numa instnace to show the
vcpu cpuset is correctly.
Related-Bug: #2139351
Assisted-By: claude-code opus 4.5
Change-Id: Ib2c0d1f826ad4f31e3e9b3f61f2c9b2111bf7edd
Signed-off-by: Sean Mooney <work@seanmooney.info>
We have a list of fixtures included in the test.TestCase base class
that prevents global data and tread leaking across test cases within
the same process. The SubclassSignatureTestCase did not use our base
class but it initializes a partial libvirt driver class that will soon
use a ThreadPoolExecutor in native threading mode. So we need the leak
protection here as well. So this patch moves SubclassSignatureTestCase
to use the NoDBTestCase base class.
Change-Id: I05e818e8e83757185e5af78a5a4771c90d9fa217
Signed-off-by: Balazs Gibizer <gibi@redhat.com>
Our libvirt interface is not eventlet aware and not pure python. So
eventlet monkey patching is not enough. So the libvirt driver
implemented a native polling thread for libvirt and the queue + pipe
mechanism to push event from the native polling thread to the main
thread with the eventlet event loop.
We don't need all of these complications in native thread mode. There we
only need a single thread that poll libvirt for the events. The received
events can be executed directly on the polling thread as that is no
different from any other threads in the system now.
To make the change more understandable the event handling logic is moved
behind an abstraction that is implemented twice, once for eventlet with
the existing implementation just moved around, and once for native
threading with the simplified handling.
Change-Id: If479574cd91975810098afa8e3c220c7316a9431
Signed-off-by: Balazs Gibizer <gibi@redhat.com>
This is needed in order to pass TPM secret information to the
destination over RPC to support the 'host' secret security mode.
The fields are nullable so that secret security modes 'user' and
'deployment' may set them to None.
A setting of None lets the other security modes convey that they are
actively choosing not to pass any data in the vTPM fields. This is
important for interacting with older compute hosts in the middle of a
rolling upgrade. We do not want to backlevel new LibvirtLiveMigrateData
objects involving vTPM because older compute hosts cannot support vTPM
live migration in any capacity.
Related to blueprint vtpm-live-migration
Change-Id: If2ff2a7bb41dea6e0959c965477b79f3f7d633e7
Signed-off-by: melanie witt <melwittt@gmail.com>
Such mock is too wide and will cause issues with our basic libraries and
test infrastructure leading to race conditions and threads leaked across
tests.
We needed to remove a bunch of such mocks found by the new rule. In some
cases we needed to make the mocking more specific for a given Event
instance, in other case the mock was not needed at all and the test case
was still not taking excessive time.
Related-Bug: #2136815
Change-Id: I3ae3740eb07bade4e0883db3e02c0a81e92b9a36
Signed-off-by: Balazs Gibizer <gibi@redhat.com>
Zuul