Enable the use of site-packages in tox which will allow the use of the
system install of libvirt while testing.
Hardcode the libvirt host UUID for tests that check this UUID when
system libvirt is being used. Without this hardcoding eight tests
would fail when using the system libvirt install.
Partially fixes bug #1113181
Change-Id: I59c5fbd45639962c0963298203c39759b6ca2d11
In order to support running unit tests on RHEL 6.x we need to patch
eventlet with contrib/redhat-eventlet.patch. We already
have support for this in the tools/install_venv_common.py but we need
to make a couple changes to allow tox to consume this:
1) Sync in the latest intall_venv_common.py from oslo. This changes
patch to use the -N option (ignore already applied patches) and makes
it safe to call the patching function more than once.
2) Add a new patch_tox_venv.py script in tools.
3) Update tox.ini to call patch_tox_venv.py before it runs tests and
coverage.
Change-Id: I3e2b07c3f718e4aede5c5f231ff0cdb7721ec885
The cfg API is now available via the oslo-config library, so switch to
it and remove the copied-and-pasted version.
Add the 2013.1b4 tarball to tools/pip-requires - this will be changed
to 'oslo-config>=2013.1' when oslo-config is published to pypi. This
will happen in time for grizzly final.
Add dependency_links to setup.py so that oslo-config can be installed
from the tarball URL specified in pip-requires.
Remove the 'deps = pep8==1.3.3' from tox.ini as it means all the other
deps get installed with easy_install which can't install oslo-config
from the URL.
Make tools/hacking.py include oslo in IMPORT_EXCEPTIONS like it already
does for paste. It turns out imp.find_module() doesn't correct handle
namespace packages.
Retain dummy cfg.py file until keystoneclient middleware has been
updated (I18c450174277c8e2d15ed93879da6cd92074c27a).
Change-Id: I4815aeb8a9341a31a250e920157f15ee15cfc5bc
Tox and run_tests.sh were running PEP8 checks against different
file-sets. This patch refactors the logic to determine which files to
run PEP8 checks on into `tools/run_pep8.sh` where it can be called by
both tox and `run_tests.sh`.
Additional fixes:
Some of our Python XenAPI Dom0 plugins don't end in *.py but should
still be checked by PEP8. This patches fixes the hacking.py violations
in the files and adds them back to the srcfiles list.
Merged tools/unused_imports.sh into tools/run_pep8.sh
Change-Id: Id5edd1acb644ab938beffc3473494a179d9d8cda
* Implementing the * import detection (it is disabled for now)
* New style relative import testing based on syntax rules
* Old style relative import testing based on module search
* Inspection based solution replaced by PYTHONPATH search
in order to avoid module compile and initialization steps
(code execution) in a syntax checking phase.
This solution is faster and safer, but does not able to recognize
modules added dynamically to the module scope.
Change-Id: Ifc871f4fdbcd4a9a736170ceb4475f4f2cbe66bc
* Includes some general tools/hacking cleanup
* Fix several N302 cases
* Disable N302 until all cases are fixed
Change-Id: Iddba07ff13e10dc41a6930749044bb8c0572d279
Nova coverage was broken because additional coverage tests were added
that interfere with collecting coverage during unit testing. These new
tests were not properly excluded by the coverage unit test regex. Modify
the regex to exclude any tests of the form '.*test.*coverage.*'. This
allows `tox -ecover` and `run_tests.sh --coverage` to run properly.
Change-Id: Id35f50ec335707c9eadb0e7fb3aa0833661f7333
* Fixes N403, along with docstring test
* Adds N404, multi line start
* Disable N403 and N404 until all cases are fixed
* Remove obsolote '--repeat' flag from tox.ini
Change-Id: Ibf6371efc1cdc764e66f6f7c5c4362440101f963
pep8 and hacking.py (by inheritance) have the ability to run self
tests via docstrings, if we format the comments correctly, and change
the docstring test regex. Include self testing in our normal pep8
tests.
fix the comments to actually be test case compliant
fix nova_import_alphabetical to pass on short import lists (only 2
lines, starting at the beginning of a file)
comment where it doesn't appear that hacking.py tests are working
(though there could be deeper black magic in some of them).
fix a doc string in pep8 self tests that breaks N301
fix the fact that pep8 error strings are supposed to start with
\w\d\d\d, we were just lucking out on some formatting because the
string NOVA happened to be only 4 chars long.
Add a couple of escapes so that we don't recursively fail on our
own fail self tests for comments. (boy that's fun)
Change-Id: I14d5e04cfc092b37ec4967cd7485e9975a5eb820
Replace the embedded shell scripts with setuptools commands provided by
upstream. Cleans up a few warnings that this cause tox to show.
Change-Id: I9eb47142eafb6ed038b358b94984462ca1632542
We had previously been ignoring all our custom N4xx hacking.py
errors. This fixes all the N401 errors "doc strings
should not start with a space" and reduces the ignore set down
to N402 only "single line docstrings should end with period".
It also fixes the N401 parser to catch only docstrings, and
not tripple quoted string blocks used later on in a function.
Clean up a few of the more crazy uses of """ in our code
Clean up additional funky comments to make indents a bit more
consistent, and pull in lines when possible.
Change-Id: I9040a1d2ca7efda83bd5e425b95d1408b5b63577
Previously the default test behavior was to capture stdout and stderr.
Make the new default to not capture stdout and stderr then set
.testr.conf to always capture these streams when running tests under
testr.
The motiviation behind this change is that you will want these streams
to be captured when running under testr, but when not running under
testr you may not want to capture them. An example of this would be
running `python -m testtools.run test_name` with a change to test_name
to invoke the python debugger (capturing stdout and stderr interferes
with normal debugger functionality).
Also, only invoke the test timeout by default when running under testr.
This is done for the same reason as above. When running a test under the
debugger the timeout interferes with debugging.
Change-Id: I42cbbdadb2f221ec439e92a6800d14e8436bb77b
Convert nova from using nosetests to testr for its test runner. Some
tests had to be modified to get them to run properly under testr.
run_tests.sh has been updated to run testr instead of nosetests.
Coverage is collected by running subunit.run under coverage.py when the
coverage environment is selected.
Note that you will need to rebuild your virtualenvs as nose is being
removed from the dependency lists and is being replaced by testr. Tests
will run in different processes once this test is merged so you cannot
use test classes to pass information between tests. Each test should be
a proper independent unit. Additionally the -x and -d flags to
run_tests.sh have been removed as there are currently no decent
approximations for those functions.
Change-Id: I019ca098972ca749b195f59968cf21edd5ba9109
* With pep8 1.3.3 the exclude logic monkey patch broke causing
tools/hacking to run on openstack/common code
* Also add .git to exclude list
Fix bug 1086410
Change-Id: Ifc50ac1963c50c338432bbb4b1e15cdf58ed2128
Apart of making pep8 version standard across all openstack
projects.
With this change we ignore E712 since it is normal to use
"column == True" in sqlalchemy.
Change-Id: I73a162847a79558cb158112878033edf18039805
Signed-off-by: Chuck Short <chuck.short@canonical.com>
This updates the pep8 hacking checks in our tox.ini file so that
we are also scanning the bin directory for HACKING violations.
Change-Id: I4b010ef4dd799f0afe0fcd56c823a611021e8f60
This reverts commit 30e513309f.
The python mysql module was removed from test-requires in favor
of test-options, but the work to actually use that was never
completed. Revert the change so that mysql testing is actually
performed again.
Change-Id: Iaf35811cc748272229260f2dab95520995a69b44
pylint creates some files, and leaves git in a detached HEAD.
pylint can still be run via 'tox -epylint'
Change-Id: Ic0193f2488f1c6eb4a9f0fabbe24ac9869239890
Add a new silent test target lintstack based on pylint in Jenkins.
lintstack will compare the pylint errors between HEAD and HEAD~1,
filter out known false positives and report violations in pylint
original parseable format for Jenkins to consume.
Change-Id: Ic2962cb42a174bfe9535aea88475ff4ede3bf9ff
Messages translated into other language like Chinese cause some
unit tests to fail.
Fixes LP bug #1037946.
Change-Id: I01d04333d28bab52d6f424432524b206f3845fba
First of all, our pep8 exclude was excluding openstack, to trap
for not doing pep8 checks on openstack/common, which comes from elsewhere.
But, pep8 strips filenames down to basename when doing exclude checks on
them, which makes no sense. To fix this, grab the two functions from pep8,
fix them, and monkeypatch them from within hacking.py.
Patch has been submitted upstream as:
https://github.com/jcrocholl/pep8/pull/111
Also, changed the exclude to catch just openstack/common.
Change-Id: If0b18ae828e74203f84a8b6f8b4ba0100b3bbc59
Nova has additional pep8 "plugins" that they expect to run as part of the
gate. This patch will run tools/hacking.py instead of pep8 directly. Also,
it fixes the hacking violaions in contrib, plugins and smoketests.
Fixes bug 1010136
Change-Id: I86d8789218c197d5d4a43d1201465d340646a395
Instead of a hard-coded MANIFEST.in to list non-code files to be included in
the tarball, use the setuptools-git plugin to ensure that every file that's
in git will wind up in the tarball. The only things needed in MANIFEST.in
now are files that are generated as part of the sdist run.
Change-Id: I76df685d58f7b56977d859e8df92e845f450b3e4
Add a tox environment that will install all of the optional
packages and which will run with system site packages enabled
so that we pick up those tests as well. This should allow us
to run expansive tests on jenkins that aren't normally required
locally, but which are possible.
Change-Id: Iabd61874061e24950d4d2082a2fba158b4601624
Shrink tox.ini to the new short version.
Fix the test cases to be able to be run in nosetets plus the
openstack.nose_plugin, which finally removes the need for
nova/testing/runner.py
Also, now we'll just output directly to stdout, which will
make nose collect the trace logging directly and either output
it at the end of the run, or inject it into the xunit output
appropriately.
Change-Id: I1456e18a11a840145492038108bdfe812c8230d1
The latest release of pep8 adds stricter rules for extraneous
whitespace within lines. This patch also addresses these new
violations acoss the codebase.
Change-Id: Ib7e50281870473df1704ed50868c5c2e26bdb02e
Nails the pep8 deps for tox and test-requires to 1.0.1.
Fixes an issues causing pep8 failures due to a new pep8 release.
Change-Id: I30be4909f052c29834afbfddba6007045afa519b
Since our overall environment on the jenkins slaves is controlled,
it's safe to allow site-packages. BUT - more importantly, it's the
only way to get python-libvirt to be accessed.
Change-Id: I1181127a134afdfc1de58d0ab819395bb8995647
Clark Boylan